vip sensors california , usa ph (949) 429 3558 fx (949) 528 0126 info@vipsensors.com www.vipsensors.com vip sensors reserves the right to modify these specifications without notice. v01 quality innovations customer satisfaction model 1017A piezoelectric accelerometer description the vip sensors model 1017A is a small piezoelectric accelerometer for vibration measurement on small structures and objects . its light weight of 2.8 grams (without the low-noise cable) effectively minimizes mass loading. the accelerometer is a self-generating device that requires no external power source for operation. the model 1017A exhibits a broad frequency response range and a high resonance frequency. low-noise, flexible coaxial cables are used for error-free operation . vip sensors signal conditioner models 5002 and 5005 are recommended for use with this high impedance accelerometer. actual size ? small size, light weight (2.8 grams) ? frequency response to 5 khz ? resonance frequency at 21 khz ? good for shock measurements ? no external power required ? adhesive mounting typical temperature response -10 -5 0 5 10 15 20 25 -50 50 150 250 350 temperature f (c) % deviation (-46) (10) (66) (121) (177) mm 0.36 (9.14) s=0.37 (9.5) ?=0.43 (11) 10-32 ( out ) typical amplitude response -5.00 0.00 5.00 10.00 15.00 1 10 100 1000 10000 100000 frequency (hz) % deviation in (mm)
vip sensors california , usa ph (949) 429 3558 fx (949) 528 0126 info@vipsensors.com www.vipsensors.com vip sensors reserves the right to modify these specifications without notice. v01 quality innovations customer satisfaction model 1017A piezoelectric accelerometer units dynamic characteristics axial sensitivity pc/g 2 transverse sensitivity % 5 frequency response see typical amplitude response resonance frequency hz 21,000 amplitude response [1] + 5 % hz 1 to 5000 + 1 db hz 0.5 to 7000 temperature response see typical temperature response amplitude linearity % < 1 electrical characteristics output polarity acceleration directed from the base into the transducer is defined as positive resistance g ? >1 capacitance pf 300 grounding signal ground connected to case environmental characteristics temperature range -40 f to 302 f (-40 c to +150 c) humidity epoxy sealed shock limit g pk 2000 base strain equiv. g pk/ strain 0.002 magnetic field sensitivity equiv. g rms/gauss (/t) 1e-5 (1) thermal transient sensitivity equiv. g pk/f (/c) 0.018 (0.01) physical characteristics weight oz (grams) 0.1 (2.8) case material stainless steel mounting adhesive [2] piezoelectric material pzt-5 structure annular shear output connector 10-32 receptacle, top mounting accessories included: optional: 9006-120 cable, low noise 10-32/10-32, 10 ft (3.3 m) 9604 cable adapter 10-32/10-32 (extend cable length) calibration certificate notes 1. low end response of the transducer is a function of its electronics. 2. adhesives such as cyanoacrylate epoxy (super glue), petro-wax and hot-melt glue and may be used to mount the accelerometer. specifications the following performance specifications conf orm to isa-rp-37.2 (1964) and are typical values, referenced at +75f (+24c) and 100 hz, unless otherwise noted. calibration data, traceable to na tional institute of standards and technology (nist), is suppli ed.
|
